Thursday, November 12, 2015

How to enable Ad Block on your Android Phone without Root

REQUIREMENTS:


1.  Hosts File (Ad Block) : Click Here to Download
2.  Custom Recovery(CWM/TWRP) installed on your Android Phone : Click Here to learn how to flash custom recovery to Lenovo K3 Note.
3. Android Phone (Obviously).

PROCEDURE TO ENABLE AD BLOCK WITHOUT ROOT:


1.  After flashing custom recovery on your Android Phone.

2. Power On your Phone and copy the downloaded Hosts file (Note: Do not extract the zip file) in your memory card.

2. Power Off your phone.

3. Press Volume Up + Volume Down + Power Button at the same time to boot into custom recovery (TWRP/CWM). (Note : This Button configuration may vary depending on your device so google it to know how to boot your phone into Recovery Mode)

4. Once in custom recovery, select "Install".

5. Then choose your Hosts zip file from the location in your memory card you copied earlier.

6. Swipe to right to flash the Hosts zip file.

7. Then select Reboot System.

8. Njoy! You have successfully enabled Ad-Block on your Android Device.

FB GROUP : LENOVO K3 NOTE OFFICIAL GROUP [INDIA]

https://www.facebook.com/groups/Lenovo.K3.Note.Official.Group.India/

Read more »

Sunday, September 20, 2015

How to play Gameloft games without lag and Disable CPU throtling without root on Lenovo K3 Note (k50t5/k50a40)


The Lenovo K3 Note is an amazing budget phablet that does pretty much everything right. But users complained that games lagged after playing for about 5-10 minutes in K3 Note whereas the Meizu M2 Note which has the same CPU as the Lenovo K3 Note handled all the games very smoothly.
So what do you think what might be the problem here?
Lenovo has enabled CPU throttling to prevent CPU temperatures from going above 50 degree celsius.
So, whenever you play game on K3 Note after a few minutes the CPU temp hits 50 degree celsius mark which activates the thermal throttling mechanism. When thermal throttling gets activated you can see a sudden frame drop while playing games like Asphalt 8 and Modern Combat 5.

Here I will show you how to disable thermal throttling in Lenovo K3 Note without rooting your phone!

PROCEDURE TO DISABLE CPU THROTTLING ON LENOVO K3 NOTE :


1. Flash TWRP recovery using SP Flash Tools by following tutorial from this link here : http://yoyovirus.blogspot.in/2015/08/how-to-flash-custom-recovery-to-lenovo.html

2. After you successfully flash TWRP recovery, boot your phone into the recovery mode by presssing Volume UP + Volume DOWN + Power buttons together at the same time.

3. Once you boot into TWRP recovery you will see some options like shown in the below image.




















4. Now select Mount Option and then put a cross on "System" option to Mount the System as hown in below image.




















5. Then press the back button to return to the main screen of TWRP
recovery.

6. Now, select Advanced option and then select File Manager option.





















7. Here browse goto root path and then browse to System/etc/.tp path.

8. Here you will see three files . Select the file with name "thermal.conf".

9. Rename this file by giving any extension like "thermal.conf.xxx".

10. Congrats you have successfully disabled CPU throttling from Lenovo K3 Note.

11. Go back to main screen of your TWRP recovery and power off your phone by selecting Restart and then Turn off option.

12.Now Flash "Stock Recovery" using SP Flash Tools in similar way you flashe TWRP recovery.

13.Power On your phone and now you can play all the Gameloft games like Asphalt 8 and Modern Combat 5 and other HD games with no lags and frame drops.

Note :
1.Only for Vibe UI ROW Stock ROM.

2.You can also disable CPU throttling on a rooted K3 Note by renaming "thermal.conf" to "thermal.conf.xxx" file in "System/etc/.tp" directory using ES File Explorer. But by rooting your k3 Note you can not update your phone via OTA updates.So, I suggest the above procedure.

FB GROUP : LENOVO K3 NOTE OFFICIAL GROUP [INDIA]


https://www.facebook.com/groups/Lenovo.K3.Note.Official.Group.India/
Read more »

Friday, August 14, 2015

How to root Lenovo K3 Note (k50-t5/k50-a40)


REQUIREMENTS:


1.  Super SU zip : Click Here to Download (Check the files section on fb group)
2.  Custom Recovery(CWM/TWRP) installed on your K3 Note : Click Here to learn how to flash custom recovery to Lenovo K3 Note.
3. Lenovo K3 Note (Obviously)

PROCEDURE TO ROOT LENOVO K3 NOTE:


1.  After flashing custom recovery using SP Flash Tool by following this guide.

2. Power On Lenovo K3 Note and copy the downloaded Super SU zip file (Note: Do not extract the zip file) in your memory card.

2. Power Off your phone.

3. Press Volume Up + Volume Down + Power Button at the same time to boot into custom recovery (TWRP/CWM).

4. Once in custom recovery, select "Install".

5. Then choose your Super SU zip file from the location in your memory card you copied earlier.

6. Swipe to right to flash the SuperSU zip file.  This will root your Lenovo K3 Note by installing SU binaries and SuperSU superuser app.

7. Then select Reboot System.

8. You should find a new app called SuperSU in your app drawer. Run it once and update the SU binaries if it asks you.

9. Download any Root Checker app from Play Store and check if your phone is successfully rooted or not.

10. Njoy! You have successfully rooted your Lenovo K3 Note.

FB GROUP : LENOVO K3 NOTE OFFICIAL GROUP [INDIA]

https://www.facebook.com/groups/Lenovo.K3.Note.Official.Group.India/
Read more »

How to Flash Custom Recovery to Lenovo K3 Note (k50-t5/k50-a40)

PRE-REQUISITES:


1. First ensure the battery of your phone is above 75%, so then it will never get switched OFF during the middle of the process.

2. Next install the drivers for your phone using Lenovo K3 Note drivers.

Disclaimer : Follow the given below procedure at your own risk. I would not be held responsible for any damage that occurs to your phone, in case you do not follow the procedure properly.

REQUIREMENTS:


1.  TWRP Recovery : Click Here to Download (Check the files section on fb group)
2.  Lenovo K3 Note Drivers : Click Here to Download (Check the files section on fb group)
3. SP Flash Tool download link: Click Here to Download (Check the files section on fb group)
4. A Windows PC
5. A Lenovo K3 Note (obviously)

INSTALL DRIVER :


Install the driver then restart your PC, then connect your phone to PC via USB cable and wait till Windows configures it. Make sure the USB Debugging is enabled in this process. Once the configuration has completed, again restart your PC.

If you are using Windows 8 or Windows 8.1 then you may face problem to install the driver so follow these steps to install an unsigned driver.

For Windows 8:

1. Win + I -> Change the computer settings -> General -> Special boot options -> Restart Now.

2. When you turn off the tap Diagnostics -> Advanced Settings -> Boot Options -> Restart.

3. A menu appears, select it in the “Disable the mandatory driver signing checks” – for this you have to press F7.

For Windows 8.1:

1. Win + I -> Change the computer settings -> Update and Restore -> Restore -> Restart Now.

2. When you turn off the tap Diagnostics -> Advanced Settings -> Boot Options -> Restart.

3. A menu appears, select it in the “Disable the mandatory driver signing checks” – for this you have to press F7.

PROCEDURE TO INSTALL CUSTOM RECOVERY ON LENOVO K3 NOTE SMARTPHONE:


1. Next extract the Recovery zip file downloaded from above link.

2. Extract and open the SP Flash Tools and run "flash_tool.exe" as administrator.

3. In SP Flash Tools, just click the “scatter loading” it will ask you the location of the scatter loading file for your phone.

4. In the extracted folder of the Recovery, select the file “MT6752_Android_scatter.txt”(it is our scatter loading file) as shown in below image.


5. In the menu “Option” tab, go to “Download”, and put a “tick” in the “DA DL All with Checksum”.










6. Next Switch off your phone .

7. Make sure Download only option is selected in SP Flash Tool as shown in the image below. Now hit the Green Download button.
















8. Connect your phone now to PC via USB. The Flash tool will start the flashing process, you can see the progress at the bottom of the flash tool.

9. Don’t disturb the process until it get finished, otherwise it will brick your phone.

10. Once the process is finished, a green check box  will appear in SP Flash Tool, which implies the installation of stock firmware on your device is successful.

11. Now, disconnect your phone from USB Cable and Press Volume Up + Volume Down + Power Key at the same time to boot into Custom Recovery Mode.

12. Njoy! You have successfully installed the Custom Recovery on Lenovo K3 Note.

FB GROUP : LENOVO K3 NOTE OFFICIAL GROUP [INDIA]

https://www.facebook.com/groups/Lenovo.K3.Note.Official.Group.India/
Read more »

Monday, August 10, 2015

How to Unbrick and flash Stock ROM on Lenovo K3 Note (k50-t5)

If you are familiar with the rooting process, you probably know that rooting and changing the ROM in android phone remove the manufacturer warranty. But if the phone already have official ROM the warranty will never void.

The official ROM for Lenovo K3 Note smartphone is now available. At below I have given the procedure to install the stock ROM on your phone. By installing this ROM you will back to official ROM.

PRE-REQUISITES:


1. First ensure the battery of your phone is above 75%, so then it will never get switched OFF during the middle of the process.

2. Next take full backup of your phone.

3. Also backup the important data like SMS messages, Whatsapp messages, Contacts etc., as this would be formatted during the process.

4. Next install the drivers for your phone using Lenovo K3 Note drivers.

Disclaimer : Follow the given below procedure at your own risk. I would not be held responsible for any damage that occurs to your phone, in case you do not follow the procedure properly.

REQUIREMENTS:


1.  Official stock ROM (K50a40_S112_150610_ROW.7z) Lollipop 5.0 Indian version : download link Click Here to Download
2.  Lenovo K3 Note Drivers : Click Here to Download (Check the files section on fb group)
3. SP Flash Tool download link: Click Here to Download (Check the files section on fb group)
4. A Windows PC
5. A Lenovo K3 Note (obviously)

Install Driver :


Install the driver then restart your PC, then connect your phone to PC via USB cable and wait till Windows configures it. Make sure the USB Debugging is enabled in this process. Once the configuration has completed, again restart your PC.

If you are using Windows 8 or Windows 8.1 then you may face problem to install the driver so follow these steps to install an unsigned driver.

For Windows 8:

1. Win + I -> Change the computer settings -> General -> Special boot options -> Restart Now.

2. When you turn off the tap Diagnostics -> Advanced Settings -> Boot Options -> Restart.

3. A menu appears, select it in the “Disable the mandatory driver signing checks” – for this you have to press F7.

For Windows 8.1:

1. Win + I -> Change the computer settings -> Update and Restore -> Restore -> Restart Now.

2. When you turn off the tap Diagnostics -> Advanced Settings -> Boot Options -> Restart.

3. A menu appears, select it in the “Disable the mandatory driver signing checks” – for this you have to press F7.

PROCEDURE TO INSTALL STOCK ROM ON LENOVO K3 NOTE SMARTPHONE:


1. Next extract the Stock Rom folder
 
2. Extract and open the SP Flash Tools and run "flash_tool.exe" as administrator.

3. In SP Flash Tools, just click the “scatter loading” it will ask you the location of the scatter loading file for your phone.

4. In the extracted folder of the stock ROM, go to the folder named “K50a40_S112_150610_ROW” and in there go to target_bin folder select the file “MT6752_Android_scatter.txt”(it is our scatter loading file).

5. In the menu “Option” tab, go to “Download”, and put a “tick” in the “DA DL All with Checksum”.









6. Next Switch off your phone .

7. Make sure Download only option is selected in SP Flash Tool as shown in the image below. Now hit the Green Download button.

















8. Connect your phone now to PC via USB. The Flash tool will start the flashing process, you can see the progress at the bottom of the flash tool.

9. Don’t disturb the process until it get finished, otherwise it will brick your phone.

10. Once the process is finished, a green check box  will appear in SP Flash Tool, which implies the installation of stock firmware on your device is successful.

11. Now, disconnect your phone from USB Cable and Power On your phone.

12. Njoy! You have successfully installed the stock ROM or Official ROM on Lenovo K3 Note.

FB Group : Lenovo K3 Note Official Group [India]

https://www.facebook.com/groups/Lenovo.K3.Note.Official.Group.India/
Read more »

Thursday, July 30, 2015

How to Factory Reset Lenovo K3 Note or other Android phone with Chinese Recovery


1. Switch off your phone,
2. Press and hold the 'Volume +' and 'power button' at the same time.
3. Press these keys and hold them until you are in the Chinese recovery menu.
4. Chinese recovery will look like as shown in the below image.



5. Now you can navigate through the menu by pressing 'volume up' to move up the menu and 'volume down' key to move up the menu.
6. You can use Power button to enter any of those options.
Translation of each of the options in the Chinese recovery menu is shown in the diagram below.



  • Manual Test: this option is used to test whether the selected aspect of the phone is working perfectly.
  • Individual test: this one narrows the test to individual items such as the LED lights.
  • Test results: this option gives the overall test results of the functionality of the phone.
  • Debug test options: Tests the debug functionality of the phone.
  • Wipe eMMC: this option is the one used to factory reset your phone and is easy to identify because it has eMMC in it. eMMC basically means internal memory.
  • Version Info: This option shows basic information about the android phone including the software version, build time, IMEI number, just to mention a few.
  • Reboot: U can use this option to reboot the phone.
7. Now to Factory reset your phone navigate to 'Wipe eMMC' option using 'volume up' key and 'volume down' key and press the power button to perform Factory reset.
8. Your phone will reboot now . If not select the last option in the Chinese Recovery Menu to reboot your phone.

WARNING : Resetting your phone, means your going to eraser everything your phone have. So you need to copy first contact to your sim card, copy your audios, videos, and pictures. I am not responsible for any kind of data loss in your phone.

FB Group : Lenovo K3 Note Official Group [India]
https://www.facebook.com/groups/Lenovo.K3.Note.Official.Group.India/


Read more »