How to install CWM and root your Karbonn Titanium Octane Plus

Follow these steps to root your phone.

 

Preparation of flash/update:

1. Take a backup of your phone.

2. Your phone battery should charge 80% minimum.

3. Read all steps then do it careful.

4. Make sure proper power backup of your PC.

Download:

1. MT6592 Scatter file(MT6592_Android_scatter.txt) Click here to download

2. SP-Tool(Flashtool.rar)  Click here to download and USB  Driver(Karbonn-Usb-Driver.rar) for Octane Plus Click here to download

3. CWM Recovery for Octane Plus(recovery.img) Click here to download


4. Root Kit -SuperSU(UPDATE.zip) Click here to download

How to Root and install CWM recovery on Karbonn Titanium Octane Plus KitKat:

Step 1: Install drivers in your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it . After then switch off your phone.


Step 2:  Download SuperSU file and copy in your phone memory card. Now Download CWM recovery and scatter file of your phone and extract these file in a folder where you want. Extract and open the SP Tool. Sptool.exe Run as Administrator.

Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. Now select the "MT6592_Android_scatter.txt"  file.


Step 4: Now connect your switch off phone with PC via USB cable (Make sure your phone is switched off).


Step 5: SP Tool detect your phone and process will start. If Sptool is not recognize/detect your phone then install USB  Driver for Octane Plus driver.


Step 6: Now start installing recovery in your phone by flashing.


Note: - Don't interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 7:  After the process complete, a green ring will appear.

Here have successfully installed CWM Recovery  in your Karbonn Titanium Octane Plus.

Now let's start to Root your Titanium Octane Plus:

Step 8: Disconnect your phone.



Step 9: Do not start your phone. Press and hold vol. up + power button then select “recovery mode” (If your touch not work then use volume up and down key for menu up and down and Power button as a enter button)

Step 10. Click on install button/ choose install and select UPDATE.zip file from your save location on your SD card and install this file. Now  reboot your phone.


Enjoy Rooted phone.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Click Here to Join Karbonn Octane Plus Facebook Group.